DIY Bleach Pen Cat Shirt

Bleach pen cat shirt

 

I was inspired to do this DIY after I saw this sweater on Pinterest. This project cost me ZERO dollars and only took about thirty minutes. Clorox Bleach Pens can be found at most stores for less than three dollars (luckily I had one on hand, it is amazing at cleaning bathroom grout). The only tricky part about this DIY project is making sure to not drip any bleach on other parts of the shirt.


What you need

As far as materials go, you can use any color t-shirt. I chose black because when bleached it turns orange, and that’s the color I wanted my cat to be.

step one

Step One: Insert a sturdy rectangular object into the t-shirt. Using a hair tie or rubber band, secure the sleeves in the back to make the front of the shirt  taut.

step two

Step Two: In the middle of the t-shirt start drawing the outline of the cat face with the fine point end of the bleach pen. Make sure that the stream of bleach is steady by testing a line on a piece of paper. I drew a circle first, added the ears and whiskers, and then filled the face and ear portions using the large applicator side on the bleach pen.

Step Three: Let the bleach sit for about twenty minutes. Then rinse the bleach off of the t-shirt. Make sure to not smear any bleach when moving the t-shirt to the sink.

Step Four: Wash, dry and wear.

#DIYbleachpencatshirt

Vintage Redux (All Gold Everything)

There is something magical about antiquing. My wallet does not favor antiquing over thrifting but sometimes you can find a unique piece for cheap. When I went to my favorite local antique mall, Big Peach Antiques Mall, this past Tuesday I came across some cute kitty finds that were 50% off. I picked up some tiny porcelain kitten salt and pepper shakers, that had most of their paint rubbed off ($2.99 for the pair). I also found an absolutely ADORABLE cat bowl($1.99), which now holds my jewelry in my bathroom.

meow I hold jewelry now

I did not want to change anything about the cat bowl, but my salt and pepper shakers needed some love. I decided they needed to be gold, because nothing is classier than gold. (Trinidad James and Gold Member  approve this vintage redux).

IMG_3395

This redux is  inexpensive and very easy. I purchased gold spray paint from Hobby Lobby for $6.99 (this size will last for many projects).

Step One: Wipe any dust or residue off of your salt shakers.

Step Two: In a well ventilated area start spray painting your shakers in thin even coats. My shakers only needed one coat, if you need to do multiple coats allow at least 5 minutes of dry time in between coats.

Step Three: Let your shakers dry for at least ten minutes, and fill with salt and pepper!

vintage redux

#vintagekittyshakerredux

DIY Top Entry Litter Box

first

Let’s face it, litter boxes are a pain in the ass. My cat, Samuel, is so proud of his “duties” that after each time he uses his litter box he feels the need to bound out of it at the speed of light, causing a trail of litter from my laundry room to the kitchen. I know you feel my pain and I bet you sweep around your cat’s litter box multiple times a day too. I am taking a stand, and you should too!

This DIY top entry litter box is cheap (if not free), practical, and will save your living space from litter tracking.

Second

Third

Step One: Grab a large plastic storage container and a medium sized pot cover (or anything that is round and big enough for your cat to fit through ), and trace the pot cover about two inches from the back of the lid.

Fourth

Step Two: Using a Dremel cutting tool (box cutter, or even sharp scissors) cut along the line you traced in step one.

Fifth

Step Three: Buff out the rough edges of the hole with a file. The file I’m using is called a bastard file (hehe), but sandpaper would work as well.

Sixth

Step Four: Measure the non-slip drawer line and cut a piece long enough to fit on the lid of the container. Then position the pot cover you used as your guide in step one and trace it with a dry erase marker onto the non-slip drawer liner.

seventh

Step Five: Cut along the circle you traced in step four, making sure to not cut into the border of the non-slip drawer liner.

Eighth

Step Six: Carefully align the non-slip drawer cover onto the lid lining both holes up. Lift the non-slip material little by little and glue it onto the lid with a hot glue gun. This step was the most time consuming and works best if you have a helping hand. I glued around the edge of the hole first and then glued the rest of the non-slip material down. When finished fill the container with litter and replace your old litter box. 

Samuel has used this litter box for three days and I have only felt the need to sweep close to his litter box once! What I love about this DIY top entry litter box is the litter that would be on the floor is now trapped in the non-slip material. When I cleaned his litter box out it was easy to dump the litter on top back into the box.

This project cost me ZERO dollars. I had all of the materials on hand (minus the power tool and file…which I acquired from my boyfriend).

I hope you all enjoyed this project! Tweet me your finished products! @makeovermeow #topentrylitterbox

DIY Cat Bookend

bigger

Thrift stores are overflowing with animal figurines. Most are not so cute, but with some spray paint you can turn any ugly porcelain animal figurine into a stylish bookend.

best

Step One: Remove any price tags, marks, or dust from your porcelain cat.

Step Two: Shake your spray paint for at least two minutes.

Step Three: Place your porcelain cat on a cardboard box. (Spray paint outside if possible)

Step Four: Start spray painting your cat making sure to spray 10-12 inches away from the surface. I chose a bright pink color to brighten up my mostly white apartment.

Step Five: Allow your cat to dry for at least ten minutes, and apply a second coat. 

Step Six: After your cat is completely dry (about 45 minutes) fill the figurine with glass gems ( vase filler) by pouring them into the hole located at the bottom of the figurine. I purchased my glass gems from Hobby Lobby for $2.99.

Step Seven: Cut two pieces of Duck Tape and secure the hole on the bottom of the figurine. (Most porcelain figurines have a hole on the bottom)

Duck

This project was extremely cheap, easy, and the finished product is pretty swanky.

#DIYcatbookend

DIY Kitty Kush Kicker Toy

Image

Does your cat enjoy being high on cat nip? Does your cat roll around, purr, and meow with no concept of reality while on cat nip? If so, you better roll up some sticky-icky for your kitty and get to making this DIY kitty kush kicker toy.

What You Need:

  • Seamless t-shirt 
  • Scrap fabric to use as stuffing
  • Scissors
  • High quality cat nip (that good-good)

Step One: Lay your seamless t-shirt on a flat surface. Cut along the bottom seam and also cut just under the sleeves.This will create a rectangular piece of fabric

Image

Step Two: Cut the rectangular piece of fabric into two equal sizes.

Image

Step Three: Cut the two rectangular pieces of fabric in half horizontally. This will create four smaller rectangular pieces of fabric. Set these to the side.

Image

Step Four: (Optional if you already have scrap fabric)

Cut along the sleeves and under the collar of the shirt to create some scrap fabric that can be rolled into a ball.

Image

Step Five: Roll the scrap fabric into a ball and secure with a fabric string. Create this fabric string from the bottom seam that you cut off in step one. Repeat this step two times to create two balls.

Image

Step Six: Lay two small rectangle pieces of fabric on a flat surface. Pour two small piles of cat nip on the left and right side of the piece of fabric. Make sure to leave a few inches of room in between the piles and from the edge of the fabric. Then place the two fabric balls on top of the cat nip piles.

Image

Step Seven: Twist the fabric with the cat nip and fabric balls until it resembles a piece of candy.

Image

Step Eight: Lay the wrapped piece of fabric on top of the second piece and then twist them until the cat nip and fabric balls are completely enclosed.

Image

Step Nine: Take one of the extra pieces of fabric and cut it in half. Pull these small strips of fabric until it resembles string. Use this string to tie off the ends of the toy. Tie the middle of the toy in a knot as well. Cut off any excess strings.

Image

Image

Step Nine: Pass this kitty blunt to your furry friend and watch them go bananas for this kitty kush kicker toy.

Image

#kittykush

DIY Fancy Cat Collar

Image

If you are anything like me, which I assume you are, you take a crap ton of pictures of your cat. Samuel is obviously a fabulous model for these DIY fancy cat collars.

These collars are inexpensive and extremely easy to create. I purchased my shirt from Goodwill.

What You Need:

  • Small child’s shirt with collar.(color/style is up to you)
  • Scissors
  • Fierce cat to model the finished product.

Step One: Lay the unbuttoned shirt on a flat surface with the collar popped.

Image

Step Two: Carefully cut along the seam closest to the body of the shirt.

Step Three: Button the collar around your cat’s neck.

Finished Product:

Image

These collars are perfect when you want to include your cat in the family portrait, prom pictures, senior pictures, or when he is the ring bearer at your wedding.

You are welcome.

#DIYfancycatcollar

DIY: Whisker Mug

Recently there appears to be an obsession with mustaches. Apparently, throwing a mustache on any object adds instant sex appeal and an air of debonair. I am not anti-mustachio, however this trend seems to be played out. What is sexier, sassier, classier, and more debonair than a cat? Nothing. It is possible to maintain your achieved level of sex appeal by dawning this game changing whisker mug. Mee-ow!

IMG_2814

I purchased my DecoArt Glass Paint Markers from Hobby Lobby, $3.99 each

Step One: Shake the black paint marker and push the felt tip onto a piece of paper until ink comes out.

Step Two: Practice drawing your desired whiskers on a piece of paper.

Step Three: When you feel confident in your sketch, draw the nose and whiskers in black ink on the top center of the mug.

Step Four: Shake the pink paint marker and push the felt tip onto a piece of paper until ink comes out.

Step Five: Fill in the nose with pink ink.

Step Six: Allow the mug to dry for 8 hours.

Step Seven: Bake the mug in a non-preheated oven for 40 minutes at 375°.

Step Eight: When 40 minutes have passed, turn the oven off and let the mug cool with the oven door open.

IMG_2833

Your sexy new mug is dishwasher safe!

Post a picture of your DIY Whisker mug to our Twitter #diywhiskermug